Kistler-morse KM STXPlus Manuel d'utilisateur télécharger pdf (Page 49)

APPENDIX B: KISTLER-MORSE

PROTOCOL SERIAL COMMANDS

Request from Master Response from STXplus

>aaL4000000dssr Ar Format

>01L4112r Ar Example

‘K5’ Command — Read AB-RIO Rack Size

This command is sent by the master to request the STXplus to send the AB-RIO rack size. The

range of acceptable values is 0-3 where 0 for 1/4, 1 for 1/2, 2 for 3/4, or 3 for full. For this

example, the master requests AB-RIO rack size for an STXplus at address 01 which returns 0

(1/4) and a checksum of 50.

Request from Master Response from STXplus

>aaK5ssr A000000dssr Format

>01K5E1r A000000050r Example

‘L5’ Command — Write AB-RIO Rack Size

This command is sent by the master to set the AB-RIO rack size of an STXplus. The range of

acceptable values is 0-3 where 0 for 1/4, 1 for 1/2, 2 for 3/4, or 3 for full. For this example, the

master sets AB-RIO rack size for an STXplus at address 01 to 1 (1/2). Any of the 6 leading zeros

may be omitted.

Request from Master Response from STXplus

>aaL5000000dssr Ar Format

>01L5113r Ar Example

‘K6’ Command — Read AB-RIO Last Rack

This command is sent by the master to request the STXplus to send the AB-RIO last rack. The

range of acceptable values is 0-1 where 0 is Yes or 1 is No. For this example, the master requests

AB-RIO last rack for an STXplus at address 01 which returns 0 (No) and a checksum of 50.

Request from Master Response from STXplus

>aaK6ssr A000000dssr Format

>01K6E2r A000000050r Example

‘L6’ Command — Write AB-RIO last rack

This command is sent by the master to set the AB-RIO last rack of an STXplus. The range of

acceptable values is 0-1 where 0 is Yes or 1 is No. For this example, the master sets AB-RIO last

rack for an STXplus at address 01 to 1 (Yes). Any of the 6 leading zeros may be omitted.

Request from Master Response from STXplus

>aaL6000000dssr Ar Format

>01L6114r Ar Example

‘K7’ Command — Read AB-RIO Mode

This command is sent by the master to request the STXplus to send the AB-RIO mode. The

range of acceptable values is 0-1 where 0 is Discrete or 1 is Block. For this example, the master

requests AB-RIO mode for an STXplus at address 01 which returns 0 (Discrete) and a checksum

of 50.

B-30

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Pas de commentaire

Kistler-morse KM STXPlus Manuel d'utilisateur Page 49